|
|
|
|
|
Quality.
|
|
| |
| Leg Assembly |
|
Leg |
 |
| Top Frame |
|
|
| |
|
|
|
|
Strength.
|
|
| |
Rather than channels or angles of steel, BenchPro™ uses
square tube for structural integrity. This is especially important
for the apron, as a weak apron allows legs to be bent
underneath.
 |
 |
 |
| 16 Ga. Angle |
16 Ga. Channel |
BenchPro\'s 16 Ga. Tube |
|
|
| |
|
|
|
|
Fasteners.
|
|
| |
BenchPro™ fasteners are heavier too. While BenchPro™
uses 5/16-18 hex bolts to assemble our legs, the competitors use
only 1/4-20 bolts. Where the competitors use 1/2" long bolts to
assemble legs and leg adjustment brackets, BenchPro™ uses 2"
long heavier bolts. These longer bolts eliminate the possibility of
cross-threading.
|
|
| |
|
|
|
|
Ease of assembly.
|
|
| |
BenchPro™ benches are the easiest to assemble too. The
competitors supply an eight-page assembly manual and a big bag of
assorted fasteners; BenchPro™ benches go together with only
two bolts per leg. That\'s because BenchPro™ pre-assembles the
apron that goes around the bottom of the top and the leg assemblies
through WELDING, then pre-assembles the top to the apron.
|
|
| |
|
|
|
|
Tops.
|
|
| |
Peso:
BenchPro™ uses heavy "industrial grade" 45-pound, 1-1/8 thick
solid particle board for the core material. This is the heaviest
grade in the industry.
|
Seal:
BenchPro™ seals 5 sides plus the bottom, making the top
watertight, and eliminating the possibility of moisture causing
warpage.
|
 |
 |
|
|
| |
|
|
|
|
Ergonomics.
|
|
| |
For your ergonomic comfort, BenchPro™ offers a 180°
radius front edge on all models at no extra charge.
|
|
| |
|
|
|
|
Load capacity.
|
|
| |
While other bench makers claim weight limits of 650 - to - 1200
pounds, BenchPro\'s use of Cinch-Tite™ corner fastening, plus
extensive welding allows us to ensure a 5,000 pound load will never
damage the bench.
|
|
| |
|
|
| |
|
|
